News

Events Webinars

FailSim Webinar – Ascertain What Your Test Will Actually Cover

FailSim is a product that can be considered a strategy to make sure that you test your products properly so that no errors are made and quality can be assured.

Learn more about hardware failure simulation in this webinar on the 21st of February 10:30 AM CET

FailSim – Ascertain What Your Test Will Actually Cover

Are you sure your test program is testing accurately?

Normally defect components on a UUT will be detected during debugging, but if only one component value is recorded with false measuring parameters, it can easily lead to “fake measurements” which may never fail during testing. Ambient effects such as coupled interference from other equipment (e.g. through cable connections) can also result in “fake tests” so that the test quality is no longer assured.

How does one prevent this? How can you verify and guarantee the test quality, and how do you detect “fake tests”?

With the FailSim tool from Digitaltest you can solve this problem for analog ICT. Learn how you can automatically cross-check your test program with our FailSim tool. How it can significantly increase the test quality (and thereby improve quality assurance) by helping the user to verify the test program.

Sign up here!

In cooperation with Etronix

News about World of Testing – stay informed

Digitaltest newsletter
Stay well informed